Home page

Factory Directly Selling 6330M/C3 VL2071 Electrically Insulated Bearing Deep Groove Ball Bearing

Deep groove ball bearing consists of an outer ring, an inner ring, a set of steel balls and a set of cages. It mainly bears pure radial loads, but also can bear joint loads. When it is subjected to pure radial load, its contact Angle is zero. When it has a larger radial game, that is, it has angular contact bearing performance, which can withstand a larger axial load. Deep groove ball bearing has small friction coefficient and high limit speed, so it has more advantages than thrust bearing when axial load is rotating at high speed. But because its aligning performance is limited, the concentricity of bearing installation should be high, otherwise it will affect the balance of its operation, increase the bearing stress, and thus shorten the working life. Deep groove ball bearing simple structure, compared with other easy to achieve high precision, so can be mass production. In addition to the conventional models, it also has a variety of structural variations, such as deep groove ball bearing with dust cover, deep groove ball bearing with rubber ring and deep groove ball bearing with a stop groove and so on. Q:What Is The General Fit Between The Inner And Outer Ring Of Bearings And The Shaft. A:It is generally an interference fit. According to the direction and nature of the load acting on the bearing and which side of the inner and outer ring rotation, the load borne by each ring can be divided into rotating load, static load or non-directional load. The ferring bearing rotating load and non-directional load should be static fit (interference fit), and the ferring bearing static load can be transitional fit or dynamic fit (gap fit). When bearing load is large or bearing vibration and impact load, its interference must increase. When using hollow shaft, thin-wall bearing box or light alloy, plastic bearing box, also must increase the amount of interference. When high rotation is required, high-precision bearings should be used, and the dimensional accuracy of shaft and bearing box should be improved to avoid excessive interference. If the interference is too large, the geometry accuracy of the shaft or bearing box may affect the geometry of the bearing ring, thus impairing the rotation accuracy of the bearing. Non-separation type bearing (such as deep groove ball bearing) inner and outer ring are static fit, bearing installation, disassembly is extremely inconvenient, it is best to use a dynamic fit of one side of the inner and outer ring. Why Choose Us 1.High speed, High Precision, Low Noise, Long Service Life 2.Widely used 3.Large Inventories 4.High Quality and Competitive Prices 5.Various Brands 6.OEM is supported

Classification :

Deep Groove Ball Bearings

+8613561299328

admin@sdrhbbearing.com

E-mail

Q:What Is The General Fit Between The Inner And Outer Ring Of Bearings And The Shaft.

A:It is generally an interference fit.

According to the direction and nature of the load acting on the bearing and which side of the inner and outer ring rotation, the load borne by each ring can be divided into rotating load, static load or non-directional load. The ferring bearing rotating load and non-directional load should be static fit (interference fit), and the ferring bearing static load can be transitional fit or dynamic fit (gap fit).

When bearing load is large or bearing vibration and impact load, its interference must increase. When using hollow shaft, thin-wall bearing box or light alloy, plastic bearing box, also must increase the amount of interference.

When high rotation is required, high-precision bearings should be used, and the dimensional accuracy of shaft and bearing box should be improved to avoid excessive interference. If the interference is too large, the geometry accuracy of the shaft or bearing box may affect the geometry of the bearing ring, thus impairing the rotation accuracy of the bearing.

Non-separation type bearing (such as deep groove ball bearing) inner and outer ring are static fit, bearing installation, disassembly is extremely inconvenient, it is best to use a dynamic fit of one side of the inner and outer ring.

Why Choose Us

1.High speed, High Precision, Low Noise, Long Service Life

2.Widely used

3.Large Inventories

4.High Quality and Competitive Prices

5.Various Brands

6.OEM is supported

FACTORY WORKSHOP

Welcome to Shandong Ruihe Bearing Manufacturing Co., Ltd., your trusted partner for high-quality bearings. With over twenty years of experience in the industry, we are a leading bearing manufacturer with a strong reputation for excellence.

CUSTOMER VISIT

As a professional bearing manufacturer, we offer a wide range of bearing products to meet the diverse needs of our customers. Our products are designed and manufactured to the highest quality standards to ensure reliability and durability. Whether you are looking for standard bearings or custom solutions, we have the expertise and capabilities to meet your requirements.

APPLICATION AREAS

It is mainly used to support the rotating body, reduce friction during movement, and ensure the rotation accuracy of the machine. They are widely used in many fields, machinery manufacturing, automobile industry, electric power industry, aerospace industry, railway transportation. Such as train wheel bearings and train wheel bearings, etc., play an important role in the operation of trains.

PACKING AND SHIPPING

If you are looking for a reliable and professional bearing manufacturer with over twenty years of experience, look no further than Shandong Ruihe Bearing Manufacturing Co., Ltd. Contact us today to learn more about our products and services, and discover how we can help you meet your bearing needs with excellence and precision.

FAQ

"Looking for Reliable Suppliers? We've Got You Covered!"

Q: How is the product packaged?

A: Standard export seaworthy packing with waterproof paper inside and iron outside, secured by fumigated wooden pallets. It can effectively protect products from corrosion and various climate changes during Marine transportation.

Q: Is there quality inspection before loading?

A: Of course, all our products go through strict quality inspection before packing. Those that fail will be destroyed. Customers can also entrust a third party to inspect the products before loading.

Q: What are the loading ports?

A: In general, we ship the goods from Shanghai, Tianjin, Qingdao and Ningbo ports. You can designate other ports according to your needs.

Q:Can you deliver the goods on time?

A: Yes, we guarantee the best quality products and punctual delivery. Integrity is the tenet of our company.

Q: Can we take some samples? Any fees?

A: Yes, we can provide samples free of charge, but we don't pay for shipping. If you place an order after confirming the sample, we will refund your delivery fee or deduct it from the order amount.

Q: Can I visit your factory?

A: Of course. We welcome customers from all over the world to visit our factory.

Q: Are you a trading company or a manufacturer?

A: We are a professional bearing production company, but also a very professional bearing trading company