Home page

51203 Thrust Ball Bearing

Thrust ball bearings are designed to take axial (thrust) loads at high speeds, but they cannot take any radial loads. These bearings feature bearing washers with raceway grooves in which the balls move.

Classification :

Thrust Ball Bearings

+8613561299328

admin@sdrhbbearing.com

E-mail

RELATED PRODUCTS

ONLINE MESSAGE

PRODUCT DETAILS

There are two key points in the assembly of thrust ball bearings. One is the control of the pressing quality of the cage and the steel ball, and the other is the control of the nominal height T after the assembly of the bearing. In addition, since the shaft ring and the seat ring can be separated, there is a management problem. It is to prevent the mixing of imported bearing parts. The M-type press cage uses a curved edge assembly die. After pressing, the steel ball is required to rotate flexibly in the pocket hole, but it can not fall off from the pocket hole, and the technical procedure to check the momentum of the steel ball in the pocket hole. If the solid cage is imprinted too deeply, the momentum of the steel ball will be small, and the connection between the embodiments and the cage is too little and the strength is insufficient, which is easy to fall off and cause the cage to be scrapped.

Small thrust ball bearing seat ring and shaft ring inner diameter size difference is very small, there is no obvious difference between the two bundles. In order to prevent the phenomenon of mixed sleeves, that is, a set of bearings installed are found to be both seat rings or shaft rings. This requires certain measures. Usually, the drawing ring and the seat group are distinguished by auxiliary tooling when the set is closed, or the inner diameter plug gauge is used to check the inner diameter size before sampling the nominal height. In order to check the inner diameter, the seat ring is placed below and the shaft ring is placed above. If the inner diameter of the seat has obvious quenching heating oxidation color or is not grinding, there is no need to test the inner diameter size, and the difference between the shaft ring and the seat can be clearly seen, and it is not easy to mix. After assembling the thrust ball bearing, the nominal height T should be measured to confirm whether it is qualified. When measuring, calibrate with height block or standard parts, and measure the load, the bearing needs to rotate dozens of times, and be sure to reach the minimum height.

Bearing role:

Its role should be to support, that is, literal interpretation used to bear the shaft, but this is only a part of its role, support its essence is able to bear radial load.

The lubrication method of bearings is divided into grease lubrication and oil lubrication. In order to make the bearing function well, first of all, it is necessary to choose the lubrication method suitable for the use conditions and purposes. If only lubrication is considered, the lubricity of oil lubrication prevails.

Main applications of thrust ball bearing:

Crane hook, vertical water pump, vertical centrifuge, jack, low speed reducer, etc.

Peculiarity:

1. There are two types, one-way and two-way

2. In order to allow for installation error, whether one-way or two-way, you can choose spherical aligning spherical seat cushion type or spherical seat ring type.

3. High-quality steel: The use of ultra-clean steel that can extend the bearing life by up to 80%

4. High grease technology: Lubricant technology can extend the life of the grease and improve the performance of the bearing

5. High-grade steel ball: quiet and smooth when rotating at high speed

6.Use the collar in the option to allow installation errors

FACTORY WORKSHOP

Welcome to Shandong Ruihe Bearing Manufacturing Co., Ltd., your trusted partner for high-quality bearings. With over twenty years of experience in the industry, we are a leading bearing manufacturer with a strong reputation for excellence.

CUSTOMER VISIT

As a professional bearing manufacturer, we offer a wide range of bearing products to meet the diverse needs of our customers. Our products are designed and manufactured to the highest quality standards to ensure reliability and durability. Whether you are looking for standard bearings or custom solutions, we have the expertise and capabilities to meet your requirements.

APPLICATION AREAS

It is mainly used to support the rotating body, reduce friction during movement, and ensure the rotation accuracy of the machine. They are widely used in many fields, machinery manufacturing, automobile industry, electric power industry, aerospace industry, railway transportation. Such as train wheel bearings and train wheel bearings, etc., play an important role in the operation of trains.

PACKING AND SHIPPING

If you are looking for a reliable and professional bearing manufacturer with over twenty years of experience, look no further than Shandong Ruihe Bearing Manufacturing Co., Ltd. Contact us today to learn more about our products and services, and discover how we can help you meet your bearing needs with excellence and precision.

FAQ

"Looking for Reliable Suppliers? We've Got You Covered!"

Q: How is the product packaged?

A: Standard export seaworthy packing with waterproof paper inside and iron outside, secured by fumigated wooden pallets. It can effectively protect products from corrosion and various climate changes during Marine transportation.

Q: Is there quality inspection before loading?

A: Of course, all our products go through strict quality inspection before packing. Those that fail will be destroyed. Customers can also entrust a third party to inspect the products before loading.

Q: What are the loading ports?

A: In general, we ship the goods from Shanghai, Tianjin, Qingdao and Ningbo ports. You can designate other ports according to your needs.

Q:Can you deliver the goods on time?

A: Yes, we guarantee the best quality products and punctual delivery. Integrity is the tenet of our company.

Q: Can we take some samples? Any fees?

A: Yes, we can provide samples free of charge, but we don't pay for shipping. If you place an order after confirming the sample, we will refund your delivery fee or deduct it from the order amount.

Q: Can I visit your factory?

A: Of course. We welcome customers from all over the world to visit our factory.

Q: Are you a trading company or a manufacturer?

A: We are a professional bearing production company, but also a very professional bearing trading company